Joined in 2023 
82 
63 About this deal
monochrome display and a resolution of 4098 x 2560 pixels, the Mars 3 Pro enables precise models to be printed with fine details. But I think the Mars 3 series is a very safe purchase in terms of not feeling like you bought in at the wrong time. We will use anonymous information about the ad you saw and how you engaged with it to measure and improve our advertising campaigns in the future. The paper is used to compensate for the thickness of the film on the Mars 3 Pro, which is a bit thinner than the film on its larger siblings. However, for this model I decided to forego the drain holes, so there is likely some uncured resin hiding inside of my print.
After the 14-day refund/30-day exchange window has expired, your only recourse regarding the products is through our warranty. At first I found it annoying that it was not there, because this makes it more likely that new people will have spills. The first thing the manual says is to attach the build plate, but that was impossible without lifting the platform. This “fully built” approach is very common with resin printers, but if you are used to FDM printers that might not be something you expect (as they often come in kits that need assembly).You could wait for the next great thing, but this is, buck for buck, the best time to enter the Resin 3D printer market I have seen. This is because failed prints take a lot of time to clean up, can damage your printer, is wasted time/resources and just annoy me very much. Upon arrival, I would put both scrapers, the mask and the USB drive in a drawer and forget about them. There are two pairs of latex gloves and two surgical style masks for personal protection, but you will likely want to get some higher quality masks and additional gloves for working with resin as these are usually used up fairly quickly. You will be pressing it so little that it does not really matter that it is one of those touch screens that feels awful to touch.
Further more, more friendly and easier to work with resins are being rapidly developed and put out into the market by both Elegoo and other manufacturers. This means that if you do happen to spill and harden some resin on the display, you at least are more likely to be successful in removing it without scratching the LCD.Comfortable printing experience: the built-in air purifier reduces the bad smell of resin and offers you a more pleasant and fresh experience. Now recognized as one of the largest and most trusted manufacturers of SLA or Resin 3D Printers in the world.
The overall design of the Mars 3 Pro is extremely similar to the previous Mars 3, and shares the same curviness, which makes sense because they are both variations of the Mars 3. With a big printer, it is harder to level the build plate exactly, they can have more wobble when printing and the FEP are bigger (giving various problems when the print has to be pulled off that big FEP). Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.You are welcome to copy my settings, but do know that they might not work – even though you use the same machine and resin. During testing, while the air purifier likely helped to mitigate the smell, I noticed that the resin odor wasn’t completely eliminated.
The USB drive is the worst because it causes failed prints without people realising that it is hurting them. The trade of is that until cured with exposure to UV light, the not super friendly for you or the environment resin can be hazardous, though if the prints and waste byproducts are treated properly this is not a problem.Placing models at an angle makes it easier to remove them from the build platform without damaging them in the process. The sandblasted build plate and second generation FEP ( Fluorinated ethylene propylene - and no, I didn't know that of the top of my head) film both increase the ability for prints to adhere to the build plate and release from the vat ensuring more successful prints more often. Elegoo is a very reputable firm in the resin 3D printing space, and the Mars 2 Pro and Mars 3 are often recommended printers for beginners – whether that is for printing miniatures or other small things where details are important. The resin will be less viscous and drip faster from the build plate, so it caught me off guard the first time.
Great Deal 
New Comment